In January I spent a few days organizing my fabric. For storage, I have a box for all 10″ squares and a 4-drawer Rubbermaid unit I’ve divided out for specific cuts for my printed fabric only. I’ve designated one drawer for each cut: strips, remnants, fat quarters and WOF yardages. I also have another unit with one small drawer just for solids.
Lately I’d been accumulating solids and my drawer was getting full. Also, when I needed a particular color I’d have to take everything out which was pretty inconvenient. That said, I decided it was time to find another way to store my solid fabrics.
I’d remembered reading about quilters using comic book boards for storing fabric, so I thought I’d take a look into the process. A quick Google search and a brief video showed me how easy and cost effective it is.
I found that many quilters use BCW boards sized 7″ x 10 1/2″ (Amazon). A pack of 100 costs around $17 so if you don’t have a huge stash, this quantity will last quite a while! The boards are definitely sturdy enough for wrapping up to a few yards of fabric, and they’re acid free so they won’t cause any discoloration.
Quilters also use plastic alligator clips for securing the fabric. On Amazon, a pack of 500 costs around $10. Again, this quantity can last a long time! The clips are really sturdy and the ridges grip and hold nicely.
After ordering these two items, I was ready to go.
For my stash, I decided that the smallest amount of fabric to be stored on a board would be a fat quarter; anything smaller stays in the drawer. I also decided to store larger yardage amounts on the boards too, as I don’t usually have more than a yard or two in any given color.
To get started, I ironed everything. I recommend doing so because of course fabric looks nicer pressed and since it will be stored this way indefinitely, flat lying fabric will give the best results possible.
Next, folding and wrapping. For fat quarters, fold selvage to selvage. This will make your piece about 11″ high by 18″ wide. Next, place the board in the center where it will fit just right vertically, then wrap the sides around. For yardage, fold selvage to selvage. Then fold again in half, bringing the fold on the bottom up to the selvage at the top. The fabric will measure about 11″ high, just like the fat quarter. Fold the fabric once again, this time from side to side, bringing the raw edges to the fold. Place the board vertically in the center then wrap the sides around.
Place clips on the ends to secure the fabric and you’re finished!
For mine, I made tags to identify the fabric. I simply cut strips of paper about 3/4″ x 2″, and using a Frixion pen I noted the fabric brand and color. It took some extra time to figure out what was what, but when I need to know later the info will be there.
I also have plastic bins for storing the fabric. Not only does it look pretty, it’s a great way to see what’s on hand and it allows for quick access.
If you have a lot of fabric that you want to store on comic book boards, you may want to do a few pieces at a time. I had 26 cuts and it took me several hours! I’m happy to have spent the time for the great results, and I plan to do this as I acquire fabric so my stash is always stored up-to-date.